Your browser does not support script

{Scrap Blend 22 Tutorial By Marleschka }


You may print out this tutorial by clicking the button above.



From our Translators

This tutorial was made in PSPX2 but can be done in any version.
For this tutorial I used a Scrap Kit and some word art from Sentimental Style who is no longer online. 2 Tubes are from Charlie here at PSP Pals.
You can get them, the pic I used & the Scrap Kit I used Here Bring the brush SE_wordART_Christmas_Quote_11 up in PSP and go to Files, Export, Custom Brush. Give it a name and hit OK. You will also need the filter, Filters Unlimited2
PLEASE NOTE: ALL LAYERS ARE TURNED OFF ON ALL TUBES
Take this arrow with you to keep your place in this tutorial.

( 1 ) Open a new 700 x 500 transparent Image.
( 2 ) From the scrap kit bring up SE_BlueChristmas_Paper_4. Go to Effects, Image Effects, Seamless Tiling and use mirror, bidirectional and width 50. Go to your foreground pattern and find it, angle 0 and scale 100.
( 3 ) Flood fill your image with this pattern. Effects Filters Unlimted2, Buttons and Frames and use 3D Glass Frame 1 with Frame size set to 20.
( 4 ) New Layer. Fill with the color #5681b9.
( 5 ) New Layer. Selections select all. Bring up scrap-blend22-pic, copy and paste into the selection. Place the blend mode on luminanceL and lower the opacity to 40.
( 6) Bring up scrap-blend22-snow, copy and paste as a new layer onto your image. Place it at the bottom. Effects 3D Effects, Dropshadow with these settings. V-4, H0, opacity 39 and blur 10.
( 7 ) Bring up scrap-blend22-tree, copy and paste as a new layer onto your image. Place it to the right, (see my image) put the blend mode on LuminanceL. Bring up scrap-blend22-tree-snow, drag it below the tree layer and match it and put the blend mode on LuminanceL.
( 8 ) From the scrap kit bring up SE_BlueChristmas_35mmFrameCluster, copy and paste as a new layer onto your image. Place it to the left and down a little. (see my image)
( 9 ) Bring up the scrap-blend 22 pic again. Copy and paste as a new layer onto your image. Drag it below the frames. Place it so the bird is in the left frame. Take your freehand selection tool and make a selection around the inside of that frame. Selections, premote selection to layer. Selections select none.
( 10 ) Now move the pic so you see the other bird in the bottom frame, and repeat the selection and promote it to a layer.
( 11 ) Take the pic to the top frame and with your pic (deformation) tool, squeeze it in and up so you see the house and the xmas trees in that frame. Make a selection around the inside of that frame, selections invert and hit delete. Selections select none.
( 12 ) Close off all your layers except the frame layers and pics and merge them visible.
( 13 ) Bring up snowmangreetings, copy and paste as a new layer onto your image. Image resize and resize by 65%. Place him beside the frames (see my image) Effects 3D effects Dropshadow with these settings. V & H -4, Opacity 40, blur 9 and color $000000.
( 14) Bring up SE_BlueChristmas_35mmFrameCluster again. With your freehand selection tool make a selection around the bottom frame. Stay in close to the edge of this frame, it has a dropshadow and we don't want that. Copy and paste as a new layer onto your image.
( 15 ) Place it to the right of the frames and down (see my image) With your pic ( deformation) tool squeeze it in and up to make it smaller. With your clone tool, size 30, hardness 100, Opacity 100 fill in the frame in the center. Now give it a dropshadow with these settings, V & H 2, Opacity 30, Blur 5 and color $000000. Repeat with V & H at -2.
( 16 ) New Layer. Go to your brush tool and find the brush you saved at the beginning of this tutorial. With your foreground color on #3c6198 and the size of the brush at 194 click 3 times in the center of the filled in frame.
( 17 ) From the scrap kit bring up SE_BlueChristmas_LeatherLabel_1, copy and paste as a new layer onto your image. Drag it below the snoman layer. Resize by 45%. Image rotate free rotate and rotate it by 10 to the left. Place it over the top of the first frame.
( 18 ) From the scrap kit bring up SE_BlueChristmas_LeatherLabel_4, copy and paste as a new layer onto your image. Resize by 45%. Place it at the bottom of the center frame.
( 19 ) From the scrap kit bring up SE_BlueChristmas_LeatherLabel_3, copy and paste as a new layer onto your image. Resize by 45%. Image rotate free rotate and rotate it by 19 to the right. Place it at the top of the left frame.
( 20 ) From the scrap kit bring up SE_BlueChristmas_Flower, copy and paste as a new layer onto your image. Resize by 25%. Drag this layer below the snowman, place it at the top of the left frame. Effects 3D effects Dropshadow with these settings. V & H 2, Opacity 30, blur 5 and color $000000. repeat with V & H at -2. Duplicate this layer 2 times and place them at the top of the right frame and center top of the bottom frame. (see my image)
( 21 ) From the scrap kit bring up SE_BlueChristmas_FlowerPin, copy and paste as a new layer onto your image. Resize by 40%. Place it to the left of the filled in frame. (see my image) With your pic (deformation) tool pull it down a little. Place the blend mode on LuminaceL. Now click on the the appropriate layers and erase what is showing through. Use a small eraser, I used size 5 down to 2 with hardness and opacity set to 100. Duplicate this layer and place it to the right and then do the same with the eraser. Effects 3D effects dropshadow with the same settings as before on both layers.
( 22 ) Bring up c_snowflake_cutie, copy and paste as a new layer onto your image. Resize by 25% and again by 85%. Place it to the left above the frames (see my image) Give it the same dropshadow as before. Duplicate this layer and image resize by 75%. Place it to the right.
( 23 ) Close off your bottom 5 layers and then merge visible. Put the blend mode of the merged layer on LuminanceL. Open all layers.
( 24 ) Click on your snow layer and with your eraser, erase all that is showing through on the snowmans coat and the frames. Close your background layer and merge visible.
( 25 ) Effects Filters Unlimted2, Edges Square, Square Edge 17. Image resize and resize this layer by 95%. With your pic (deformation) tool pull it down a little and move it slightly to the left. Open your background layer and merge visible.
( 26 ) With your background on a silver background and your foreground on color #3c6198, take your Preset Shape tool and find a star. Line size 1,create as Vector & Anti-alias ticked, draw out a star. Place it on your image where you want it to hang from the tree. Layers convert to raster layer.
( 27 ) Swop your silver background to the foreground and take your pen tool set to Line Style Diamond, Draw Point To Point, Create as Vector & Anti-alias ticked, Width 2. Click on the layer below your star and starting in the center of your star draw a line to the top of the branch on the tree. Watch your numbers so you have the line straight. Layers convert to raster layer. Click on your layer above and merge down. Copy.
( 28 ) Go into Animation Shop and paste as a new animation. Click on Effects, Insert Image Effects, and use these settings. Animation Frame ticked, Effect Length, 2.2 secs, Frames per Second 4 fps, Effects Compress and hit OK. Edit copy, click on frame 9 (it must be the only one ticked) Edit paste after current frame, Animation, reverse frames. Now click on frame 10, hold down your Ctrl key and then click on frame 18, right click and hit delete.
( 29 ) Back to your image in PSP and Draw out another star and line like you did before. Repeat all as you did before. Do this 2 more times. You can add as many stars as you like but be careful on how many because it will make your image very heavy. As you can see I have done 3 stars.
( 30 ) When you have finished your stars in animation shop go back to your image in PSP and delete the stars layers. Place your name on it if you wish. Merge visible. Edit copy your image.
( 31 ) Back into Animation Shop and paste as a new animation. Duplicate this image so you have 16 frames in all. Edit select all. Go to one of your animated stars, edit select all, edit copy, back to your main image and paste into selected frame and place it where it needs to go.
( 32 ) Do the same with the rest of your stars, view it to make sure it looks right.
( 33 ) Save as a gif file and you are finished.
I hope you have enjoyed this tutorial.

home    tutorials menu    guestbook

Visitors
Since January 22, 2004


© Copyright PSP Pals © All rights reserved